meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:0003:tds [07/10/2017 18:55] – [0003·TDS ~ Temperature sensor] franen:0003:tds [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-====== 0003·TDS ~ Temperature Sensor ====== 
  
-===== Description ===== 
- 
-The module **0003·TDS** is specially designed for measuring temperatures in the range  
--55 ° C ~ 125 ° C, especially suitable for temperature monitoring  
-in low temperature ovens and preservation processes. 
- 
- 
-It is based on a monolithic [[https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf|chip]] that offers a resolution of 0,07ºC with an error in the range of -10° C to 85° C (+-)0.5° C. 
- 
- 
-===== Parameters ===== 
- 
-^ Parameter                     ^  Minimum ^  Typical ^  Maximum ^     Unit       ^ 
-| Temperature Range             |      -55 |          |      125 |  ºC   | 
-| Measurement Error (-10~85ºC)  |          |          |  (+-)0,5 |  ºC   | 
-| Measurement Error (-55~125ºC) |          |          |  (+-)2,0 |  ºC   | 
- 
- 
-===== Connections ===== 
- 
-{{  0003:ds18b20_bulb.jpg?300}}{{0003:tds.svg }} The measuring probes of this device are of the [[https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf|DS18B20]] type, its power is 3.3V and communicate with the equipment through a single cable, in the image you can see one of the probes that we supplied with the device. 
- 
-The auxiliary terminals has the power supply terminals, gnd and positive, and terminal communications with the probe. 
- 
-Particular attention must be paid to the connection, it must be as stable as possible, the connection cable will be less than 3 meters and the measuring element, the chip, must be protected from weather agents. 
-===== Startup ===== 
- 
-===== Configuration ===== 
- 
-===== Use =====